- What is the default TCP port for iSCSI?
A. 3260
B. 1433
C. 21
D. 3389 - You have a Windows Server 2022 Hyper- V host named Jupiter. You want to deploy several shielded virtual machines on Jupiter. You deploy a Host Guardian on a new server. You need to view the process of the shielded virtual machines installation. What should you run to see the progress of the shielded VM?
A. Get- ShieldedVMProvisioningStatus cmdlet
B. Diskpart command
C. Set- VHD cmdlet
D. Set- VM cmdlet - You are the administrator of a mid- sized network. You have a Hyper- V host that runs Windows Server 2022. The host contains a virtual machine named Virtual1. Virtual1 has resource metering enabled. You need to use resource metering to track the amount of network traffic that Virtual1 sends to the 10.10.16.0/20 network. Which cmdlet would you run?
A. Add- VMNetworkAdapteiAd
B. Set- VMNetworkAdapter
C. New- VMResourcePool
D. Set- VMNetworkAdapterRoutingDomamMapping - You are the administrator for an organization that has started using Hyper- V. You have a Hyper- V host named Server1 that runs Windows Server 2022. Server1 contains a virtual machine named Earth. You need to make sure that you can use nested virtualization on Earth. What should you run on Server1?
A. Mount- VHD cmdlet
B. Diskpart command
C. Set- VMProcessor cmdlet
D. Set- VM cmdlet - You need to ensure that VM1 and VM2 can communicate with each other only. The solution must prevent VM1 and VM2 from communicating with Server1. Which cmdlet should you use?
A. Set- NetNeighbor
B. Remove- VMSwitchTeamMember
C. Set- VMSwitch
D. Enable- VMSwitchExtension - You are the admin for a mid- sized company. You have a Hyper- V host named Server1 that runs Windows Server 2022. Server1 has a dynamically expanding virtual hard disk (VHD) file that is 950 GB. The VHD currently contains around 450 GB of free space. You want to reduce the amount of disk space used by the VHD. What command should you run?
A. Mount- VHD cmdlet
B. Diskpart command
C. Set- VHD cmdlet
D. Optimize- VHD cmdlet - You have a Nano Server named Nano1. Which cmdlet should you use to identify whether the DNS Server role is installed on Nano1?
A. Find- ServerPackage
B. Get- Package
C. Find- Package
D. Get- WindowsOptionalFeature - You are working on a Windows Server 2022 Datacenter Server system. You need to view which roles and services are installed on the machine. Which PowerShell cmdlet can you use to see this?
A. Get- event
B. New- event
C. Trace- command
D. Get- WindowsFeature - What command would be used to register an iSCSI initiator manually to an iSNS server?
A. iscsicli refreshisnsserver server_name
B. iscsicli listisnsservers server_name
C. iscsicli removeisnsserver server_name
D. iscsicli addisnsserver server_name - You are an administrator who has set up two Hyper- V servers named Server1 (Windows Server 2022) and Server2 (Windows Server 2012 R2). Each Hyper- V server has multiple network cards. Each network card is connected to a different TCP/IP subnet. Server1 contains a dedicated migration network. Server2 contains a virtual machine named VM1. You plan to perform a live migration of VM1 to Server1. You need to ensure that Server1 uses all of the available networks to perform the live migration of VM1. What should you run to complete this task?
A. Mount- VHD cmdlet
B. Diskpart command
C. Set- VHD cmdlet
D. Set- VMHost cmdlet - Your company has decided to implement a Windows 2022 server. The company IT manager before you always used FAT32 as the system partition. Your company wants to know whether it should move to NTFS. Which of the following are some advantages of NTFS? (Choose all that apply.)
A. Security
B. Quotas
C. Compression
D. Encryption - You are the administrator of your network, which consists of two Windows Server 2022 systems. One of the servers is a domain controller, and the other server is a file server for data storage. The hard drive of the file server is starting to fill up. You do not have the ability to install another hard drive, so you decide to limit the amount of space everyone gets on the hard drive. What do you need to implement to solve your problem?
A. Disk spacing
B. Disk quotas
C. Disk hardening
D. Disk limitations - A system administrator is trying to determine which filesystem to use for a server that will become a Windows Server 2022 file server and domain controller. The company has the following requirements:
■ The filesystem must allow for file- level security from within Windows 2022 Server.
■ The filesystem must make efficient use of space on large partitions.
■ The domain controller SYSVOL must be stored on the partition.
Which of the following filesystems meets these requirements?
A. FAT
B. FAT32
C. HPFS
D. NTFS - You are an IT administrator who manages an environment that runs multiple Windows Server 2022 servers from multiple site locations across the United States. Your Windows Server 2022 machines use iSCSI storage. Other administrators report it is difficult to locate available iSCSI resources on the network. You need to make sure other administrators can easily access iSCSI resources using a centralized repository. What feature should you deploy?
A. The iSCSI Target Storage Provider feature
B. The Windows Standards- Based Storage Management feature
C. The iSCSI Target Server role feature
D. The iSNS Server service feature - You are the IT manager for your company. You have been asked to give the Admin group the rights to read, change, and assign permissions to documents in the StormWind Documents folder. The following table shows the current permissions on the StormWind Documents
shared folder:
Group/User NTFS Shared
Sales Read Change
Marketing Modify Change
R&D Deny Full Control
Finance Read Read
Admin Change Change
What do you need to do to give the Admin group the rights to do their job? (Choose all that apply.)
A. Give Sales Full Control to shared permissions.
B. Give Full Control to NTFS security.
C. Give Admin Full Control to shared permissions.
D. Give Finance Modify to NTFS security.
E. Give Admin Full Control to NTFS security. - Will, the IT manager for your company, has been asked to give Moe the rights to read and change documents in the StormWind Documents folder. The following table shows the current permissions on the shared folder:
Group/User NTFS Shared
Sales Read Change
Marketing Modify Change
R&D Deny Full Control
Finance Read Read
Tylor Read Change
Moe is a member of the Sales and Finance groups. When Moe accesses the StormWind Documents folder, he can read all the files, but the system won’t let him change or delete files. What does Will need to do to give Moe the minimum amount of rights to do his job?
A. Give Sales Full Control to shared permissions.
B. Give Moe Full Control to NTFS security.
C. Give Finance Change to shared permissions.
D. Give Finance Modify to NTFS security.
E. Give Moe Modify to NTFS security. - For security reasons, you have decided that you must convert the system partition on your removable drive from the FAT32 filesystem to NTFS. Which of the following steps must you take in order to convert the filesystem? (Choose two.)
A. Run the command CONVERT /FS:NTFS from the command prompt.
B. Rerun Windows Server 2022 Setup, and choose to convert the partition to NTFS during the reinstallation.
C. Boot Windows Server 2022 Setup from the installation CD-R OM, and choose Rebuild File System.
D. Reboot the computer. - You are the administrator of your network, which consists of two Windows Server 2022 systems. One of the servers is a domain controller, and the other server is a file server for data storage. The hard drive of the file server is starting to fill up. You do not have the ability to install another hard drive, so you decide to shrink the data on the file server. What do you need to implement to solve your problem?
A. Disk spacing
B. Disk compression
C. Disk hardening
D. Disk limitations - You are the administrator of a large organization. Four weeks ago you have built a new Windows Server 2022 Datacenter Server. You can’t remember all of the roles and features that you previously installed. You need to view which roles and features are installed on the machine. Which PowerShell cmdlet can you use to see this?
A. Get- event
B. New- event
C. Trace- command
D. Get- WindowsFeature - What is the default TCP port for RDP?
A. 3260
B. 1433
C. 21
D. 3389
